Before hanging wallpaper, check that the wall is clean, dry, sufficiently smooth, and cohesive, then confirm that the chosen wallpaper is suitable for the surface and the intended hanging method. These checks prevent you from starting on a surface that could compromise the result. They also help you identify any necessary work in time, confirm the measurements, and check the delivery.

Preparation does not involve applying a single method to all walls and all wallpapers. The surface, its previous covering, and the wallpaper-specific instructions determine the precautions to be taken. In the event of persistent dampness, peeling covering, or any doubt about the condition of the wall, suspend the hanging project and have the situation assessed before covering it.
Contents
1. Identify the wall and the previous covering
Start by examining the wall as it is, without relying solely on its overall appearance. Look for repaired areas, cracks, bubbles, lifting edges, and differences in texture. Also check the corners, the edges of openings, and the areas hidden by furniture: they may reveal finishes or defects that are not visible at first glance.
Try to identify the nature of the surface and the existing finish: painted wall, plaster, old wallpaper, or another covering. If you do not know what is under a decorative layer, do not remove it hastily. Some surfaces or coverings may require special preparation. Careful observation and, if necessary, the advice of a professional are preferable to an intervention whose effects you do not control.
Old wallpaper that is peeling, damaged, or poorly adhered can make hanging uncertain. But the right decision depends on the surface and the instructions for the new covering. Do not assume that you should always strip everything off or, conversely, that it is always sufficient to hang over it. In case of doubt, have the layers present identified before preparing the wall.

2. Check the condition of the wall before hanging
Four points deserve a separate check: cleanliness, flatness, cohesion, and dryness. A wall may look acceptable from a distance while having a local defect that will hinder adhesion or remain visible under the decor.
Cleanliness and flatness
The surface must be cleared of dirt and elements that could hinder hanging. Also observe bumps, hollows, joints, and repairs. Wallpaper should not be considered a means of automatically masking all irregularities: their visibility depends notably on the wall and the chosen covering. If the surface seems questionable to you, ask if additional preparation is necessary before intervening.
Cohesion and dryness
Check that the surface appears stable and that nothing is flaking, powdering, or peeling. A fragile surface may require an assessment and appropriate preparation. Do not try to consolidate it randomly with a product chosen without considering the wall and the wallpaper.
The wall must also be dry. Recent paint must respect the times and conditions indicated by its manufacturer: there is no universal time frame to apply to all paints and all situations. A persistent trace of dampness, a deteriorating area, or an unusual odor calls for a diagnosis before hanging. Never glue wallpaper over an unresolved damp problem.
3. Adapt the method to the chosen wallpaper
Hanging methods are not interchangeable. Non-woven wallpaper, a pre-pasted model whose glue reactivates with water, and self-adhesive covering are not prepared in the same way. Check the instructions corresponding exactly to the chosen product, rather than relying on a method used for another wallpaper.
Non-woven: consult the instructions to know the wall preparation and the hanging directions specific to this reference. Do not assume that all non-woven wallpapers are installed identically.
Water-reactivatable pre-pasted: follow the precise instructions regarding activation and hanging. Do not replace this method with a glue or procedure intended for another type of covering.
Self-adhesive: check the surface and preparation requirements indicated in its instructions. Being self-adhesive does not exempt you from checking the condition of the wall.
The exact instructions are your reference for hanging conditions, any required products, and the steps to follow. There is no universal gluing method suitable for all wallpapers and all surfaces. If the wall has recent paint, a special finish, or an old covering whose nature you do not know, mention it when seeking advice.

4. Measure the wall and prepare a sketch
Measure each affected panel and note the dimensions, distinguishing the walls, openings, and the particularities of the space. A simple sketch helps visualize the project: indicate the doors, windows, corners, outlets, or other elements that influence placement. Take the measurements carefully and check them before preparing the cutouts.
Then think about the framing: which element of the pattern do you want to highlight, and where will the joints be? This step is particularly useful when a design features visible elements or when the wall is not interrupted by an opening. Placement choices remain ideas to adapt to the room, the pattern, and the desired result.
Plan the order of the provided drops and their position on the wall before any intervention. Consult the matching and cutting directions provided with the wallpaper. Avoid deducing the dimensions or the way to align the pattern from an image alone: the instructions of the chosen reference are more relevant for preparing your project.
5. Check the delivery and organize the space
Before any cutout or hanging, check that the delivery corresponds to your order and your project. Check the references and the condition of the drops, then examine the visible elements of the order to spot an error or an anomaly. If something does not match what was planned, take the time to clarify the situation before starting: once the wallpaper is cut or hung, it is harder to go back on the preparation.
Reread the instructions that accompany the received reference and keep them at hand during the job. Prepare a clean space to arrange and check the drops without getting them dirty. Gather only the tools and products provided for by the applicable instructions. If the instructions in the delivery and those you had consulted before seem different, rely on the exact documentation of the received product and ask for advice in case of uncertainty.
6. Practical steps before starting
Observe: identify the type of surface, the previous coverings, the repairs, and the areas that require special attention.
Assess: check cleanliness, flatness, cohesion, and dryness. Note any doubts instead of covering them up or treating them randomly.
Consult: read the exact instructions of the wallpaper and check that the described method corresponds to your product and your surface.
Measure: take the dimensions, draw the openings, and prepare a placement plan for the drops and the pattern.
Check: examine the delivery before any cutout and confirm that the received reference corresponds to the project.
Decide: only start if the hanging conditions are met. If an essential point remains uncertain, ask for an opinion before intervening.
This approach does not imply systematically sanding or stripping the wall. These interventions may be unsuitable or present risks depending on the surface and the layers present. Do not attempt a technical operation if you do not know how to perform it safely. Have the wall assessed and entrust the necessary preparation to a qualified person when the situation warrants it.
7. Two concrete, hypothetical cases
Hypothetical case 1: paint that has just been applied
You want to hang wallpaper on a recently painted wall. Even if the surface feels dry to the touch, that is not enough to conclude that hanging can begin. You check the instructions of the paint manufacturer, then those of the wallpaper, and you take into account the actual condition of the surface. If the conditions are not clear or if the paint presents an anomaly, you wait until you have reliable information or ask for advice instead of applying a randomly chosen time frame.
Hypothetical case 2: a mark that returns on a wall
While preparing a room, you notice a marked area that seems to reappear despite previous cleaning. Rather than covering it with a new covering, you stop the preparation and have the cause investigated. As long as any potential dampness is not diagnosed and resolved, the hanging is postponed. Wallpaper does not replace the treatment of a wall problem.
8. Checklist and frequently asked questions
Checklist before hanging
The surface and the previous covering have been identified, or the uncertainties have been reported.
The wall has been observed to check its cleanliness, flatness, and the cohesion of its surface.
No persistent dampness is covered without diagnosis and resolution.
The instructions of the recent paint, if any, have been checked with its manufacturer.
The exact instructions of the wallpaper have been read, without transposing a method from one type of product to another.
The measurements, the sketch, the framing, and the order of the drops have been prepared.
The delivery has been checked before the cutout and hanging.
The doubts about the wall or the method have been entrusted to a professional before starting.
When to ask for a professional opinion?
Ask for advice if you cannot identify the surface or the previous covering, if the wall is flaking or peeling, if major defects concern you, or if dampness persists. An opinion is also indicated when the instructions do not allow you to confirm the compatibility between the surface and the wallpaper. It is better to clarify these points before the job than to improvise a preparation or gluing.
Should you always remove the old wallpaper?
Not necessarily: the decision depends on the condition and nature of the existing covering, the surface, and the instructions of the new wallpaper. A peeling or unstable covering must be assessed before hanging. If you do not know what is under the old wallpaper, have the situation checked rather than automatically choosing to keep it or remove it.
How long to wait after painting the wall?
There is no universal time frame valid for all paints and all conditions. Consult the instructions of the paint manufacturer, then check the requirements of the wallpaper instructions. If the wall does not meet these conditions, postpone the hanging.
Can you hang wallpaper over a trace of dampness?
No, not as long as the cause has not been diagnosed and the problem resolved. A persistent trace should not simply be hidden under a covering. Have the area assessed before continuing.
Does self-adhesive wallpaper require less preparation?
It still requires a compatible surface prepared according to its instructions. Its method of adhesion is not that of a non-woven or a water-reactivatable pre-pasted wallpaper. Check the instructions of the chosen reference and do not deduce its method from another product.
To prepare your project, discover Moodwall decors and consult our other decoration guides.