To prepare a photo for wallpaper, you must check its resolution at the actual printed size, after cropping. Moodwall’s workshop threshold is 120 effective pixels per inch, or 120 ppi. This figure describes the number of pixels available over a printed length; it does not guarantee the sharpness of the photo on its own.

The check therefore begins with the original file, the dimensions of the wall, and the area of the image you wish to keep. A photo that looks sharp on a phone may not be sufficient on a wall. Conversely, changing a “DPI” setting in the file properties does not create additional detail.
Table of Contents
Locate the original file and its dimensions
Look for the original version of the photo, before it was sent via messaging, screenshotted, or downloaded as a thumbnail. Check its dimensions in pixels: for example, 6,000 × 4,000. The file size in megabytes can give you some information about the file, but it is not a substitute for this data. Two images of the same size may have different dimensions and compression.
Keep the original and make your tests on a copy. If several versions exist, compare their resolution and detail, not just their date or name. A version labeled “HD” is not automatically the best source. An image that has been passed through several apps may have been resized without it being obvious on the screen.
Also specify the desired orientation and final format. A very wide landscape and a vertical photo require different choices to cover a horizontal wall. The right file allows for both the desired cropping and sufficient resolution in the selected area.

What the 120 ppi workshop threshold means
An inch measures 2.54 cm. To calculate the pixels needed for a printed length, divide this length in centimeters by 2.54, then multiply by 120. Do the calculation for the width and the height, and round the requirements up to the next pixel.
Pixels needed = dimension in cm ÷ 2.54 × 120. To find the available resolution, reverse the calculation: effective ppi = pixels kept ÷ (printed dimension in cm ÷ 2.54). If the two axes give different results, use the lower one for the check.
| Printed format | Minimum width | Minimum height |
|---|---|---|
| 100 × 100 cm | 4,725 pixels | 4,725 pixels |
| 200 × 250 cm | 9,449 pixels | 11,812 pixels |
| 400 × 250 cm | 18,898 pixels | 11,812 pixels |
| 406 × 256 cm | 19,182 pixels | 12,095 pixels |
The last format illustrates a 400 × 250 cm wall with an added margin of 3 cm on each side. The resolution check must cover the ordered format, not just the inner part of the wall. This margin is an example of a configuration, not a mandatory value for every project.
The 120 ppi threshold is the workshop criterion used here. It should not be presented as a universal standard applicable to all prints, nor should it be confused with a guarantee of visual quality. A photo with poor focus may contain many pixels without containing sharp details.
Cropping reduces the number of usable pixels
The entire file is not always used. If you only keep a part of a landscape, the check focuses on that part. Cutting out an area in the center of a photo and then enlarging it over the entire wall reduces the amount of detail available per printed centimeter.
Also check the proportions. To fill a rectangle without distorting the image, you may sometimes need to remove a strip at the top, bottom, or sides. A 6,000 × 4,000-pixel photo reduced to a 400 ÷ 250 ratio may retain, for example, 6,000 × 3,750 pixels. Over 400 × 250 cm, this represents about 38.1 ppi on each axis, well below the 120 ppi workshop threshold.
Changing the zoom again reduces the retained source area. You must therefore redo the check after choosing the crop. Do not validate a value calculated on the entire image if only a small portion will be used. The elements you wish to keep must also remain away from the cuts and openings.
Cropping should not stretch people, objects, or the landscape to fit the proportions of the wall. Instead, compare another crop, another surface to decorate, or another image. The measurement guide helps prepare the dimensions to use.

Examine the details, even if the calculation is correct
Open the image at a scale that allows you to see its pixels, then observe several important areas: faces, if any, contours, foliage, textures, and color transitions. Look for existing blur, compression blocks, halos around objects, or artificial details that become visible up close.
Compression may have removed some of the information. A screenshot captures the content displayed on the screen, not necessarily the resolution of the original photo. Similarly, an enlarged thumbnail may have a large file size after resaving while remaining poor in detail.
A sharp image on the screen that meets the threshold still deserves to be looked at in context. A very high-contrast area or a large face will draw more attention than an intentionally blurred background. Quality also depends on the subject and the intention: a chosen artistic blur and a focus flaw are not judged in the same way.
What to do if the file is insufficient
Start by looking for a better source: original export from the camera, a file saved on a computer, or a version provided by the author. A larger copy is only useful if it actually contains more information. Compare the details and the available area, not just the stated number of pixels.
Another crop can sometimes retain more of the image. A smaller printed surface can also change the calculation, provided it corresponds to your project. These options must be examined with the dimensions and composition, without arbitrarily moving the subject or changing the format without your knowledge.
Graphic designers can study an alternative and assess the limits of the file. Software enlargement adds calculated pixels; it does not guarantee the faithful recovery of missing details. Ask for an examination of the important area and a test before assuming that processing will make the image suitable for any format.
For a vector drawing, the reasoning may be different: vector shapes are not limited in the same way as a photograph composed of pixels. Raster images eventually integrated into the document must still be checked. Have the actual document examined rather than concluding its quality from its extension.
Prepare a detail at print size
A detail proof allows you to examine a part of the image at its final scale. Choose a representative area, then another more demanding one if necessary: sharp contour, face, gradient, or fine texture. The test must retain the enlargement planned for the wall, not automatically adjust the detail to the page.
Look at this proof from the viewing distance and closer. Compare any flaws with those of the source file and note what suits you. A proof does not guarantee every aspect of a complete wall, but it gives a concrete reference for the details rather than an impression drawn from a small preview.
Two hypothetical situations
A 6,000 × 4,000-pixel phone photo
You want a 400 × 250 cm wall. The calculation and cropping lead to about 38.1 ppi in the example. The file is insufficient for the workshop threshold, even if its preview looks pleasant. You look for the highest resolution original and have alternatives studied before confirming this format.
A large image with a small subject
You have a very high-resolution file, but wish to isolate a small detail located in a corner. The check must be redone on the retained area. If the crop is too tight, the overall high resolution is no longer sufficient. You compare a wider crop and another composition with the same wall format.
File checklist to submit
- Original kept and dimensions in pixels identified.
- Ordered dimensions and installation margins specified.
- Retained area and cropping proportions verified.
- Effective resolution calculated after cropping.
- Sharpness, compression, and details examined.
- Image you are authorized to request printing of.
- Graphic study or proof requested if doubt persists.
Frequently Asked Questions
Should you simply enter 120 DPI in the file?
No. Changing this indication without adding information does not change the available detail. The pixels kept and the printed dimensions determine the effective ppi.
Does a PDF automatically make the photo sharp?
No. A PDF can contain a low-resolution image. The export replaces neither the original file nor the check at the final format.
Is the file size enough to judge the quality?
No. You need to know the dimensions in pixels, the crop, and the state of the details. The size depends notably on the format and compression.
Can enlargement always save a photo?
No. Its usefulness and limits are judged on the actual file and on a proof. You must not promise the reproduction of details that no longer exist in the source.
Find the Moodwall guides and the catalog designs to compare the options for your project.